|
WE ARE BUYING CLEAN ROOM STICKY MATS /
TACKY MATS:
ONE OF OUR TOP SELLING ITEMS: Please send us as many pictures as you can of the actual product
and all packaging. For pictures of the packaging, we would like pictures of
each side of the carton, the edges and top and
bottom.
We will not buy from a broker. Whomever contacts us,
must be employed by the manufacturing company. We want all contact information,
telephone numbers, mailing address, ship from address and port or city where the
item will ship from.
IF YOU ALSO SELL THE STICKY MAT "BASE", LET US
KNOW.
ALL
SPECIFICATIONS ARE MINIMUM REQUIREMENTS: ALL MATS WILL
BE TESTED
- Supplier: Any Sticky Mat
Manufacturer
- Packaging per
Mat: 30 layers per mat, numbered
sequentially from 1 to 30
- Packaging per
Carton: Ten 30
layer units per box / 1000 units per skid/pallet ( 100 boxes
)
- Packaging - Final
Product: All 10 mats need to be inside a plastic bag and inside the
master case, and a corrugated liner board needs to be placed on each side of the
mats for added stability. When you open the carton, buyer should see a 24 x 36
top liner board. Below that should be the 10 sticky mats inside a plastic bag.
Under the mats, should be another liner board and then the bottom of the master
case. If this cannot be done, we need to know. Both the top and bottom sides
of the mat requires a clear layer of film to protect the adhesive on either
side. On the back layer ONLY, I request that the words "PLEASE REMOVE CLEAR SHEET
BEFORE STICKING TO FLOOR OR BASE" be placed on the
label.
SELLER: Seller needs to reply indicating
that all conditions will be met or exceeded before we
purchase.
- Sticky Mat Thickness: A minimum
of 0.050mm.
- No Bubbles: The film must lay clean
and flat and not full of small
bubbles.
- Adhesive Material: Medium to High Density Polyethylene (
with coated acrylic adhesive )
- Tensile Strength: 1.2 to 1.4 or
greater
- Elongation %: 250% to 270% or
greater
- Adhesion Mat Layer:
350grs
- Adhesion Floor Layer:
700grs
- Product Size: 24" x 36"
- Product Weight: 1.8 lbs / .816 kg's (per 30 layer mat)
- Delivery / Freight: Seller ships single pallet with 1000 total mats
(30 layers per mat).
- Delivery Location: Tampa / Riverview, FL area (USA), Zip Code 33569
- Colors Requested:
Blue, Clear / Transparent, Red, White
- Test Order: 1000 units / 1 skids (just on
first order. After we test and certify, we will buy
more) - 1000 total mats, 100 master boxes, 10 mats per box,
30 layers per mat - All stacked on a single
pallet
- Full Order: If we are satisfied with your product and service, we will follow up with at least a 20' to 40' container order.
- Tariff
Code: 3919.90.0000
- Method
of Payment: Bank Wire T/T or
Manufacturer's Request
- Instructions: It is paramount that your quoted item is EXACTLY or BETTER than our minimum requirements shown above.
If you are "NOT" the direct manufacturer of this product, please contact us before submitting your quote.
| |